Cabinet Refinishing in Houston, TX
Sprayed cabinet refinishing across Houston and the surrounding metro: degreased, mechanically sanded, primed with a high-adhesion product and finished in a waterborne alkyd that cures hard enough for daily kitchen use.
We respond within 1 business day.
Houston, TX: 77007, 77024, 77084, 77379, 77429, 77494
Cabinet Refinishing Projects in Houston
Refinishing Kitchen Cabinets in Houston
Cabinet refinishing fails for one of two reasons: the surface was not clean enough for the primer to grip, or the topcoat never cured hard enough to take daily use. Houston humidity makes the second more likely, because a film that stays soft in high humidity marks the first time something is set down on it.
Houston Cabinet Refinishing Checklist
Spraying gives a finish that brushing cannot match on a cabinet door, and doing it off site keeps the overspray and the smell out of your kitchen. Boxes are masked and sprayed in place.
Local Compliance & Performance
- Specified for Gulf Humidity: Summer humidity near 75 percent with dew points in the low 70s changes how a film cures, not just how long it takes. Coatings are specified for that load and for the substrate on the house: brick veneer and HardiePlank fiber cement far more often than stucco.
- Permit Coordination: The City of Houston lists painting, flooring and cabinets as permit-exempt interior finish work. Most homes mailing as Katy, Cypress, Spring, Humble or Richmond sit outside those city limits, where Harris or Fort Bend County is the authority. Harris County issues no building permit for interior repainting. We confirm which office covers your address at the walkthrough.
- Association and Deed Restrictions: Houston has no zoning, so land use runs on recorded deed restrictions that vary street to street, and master-planned communities add their own architectural review. Color-board packets and association documentation are prepared and submitted before a start date goes on the calendar.
- Built for Clay Movement: Beaumont Formation clay swells through the wet season and shrinks in drought, and that movement travels up through the slab as seam cracks, nail pops and separated trim joints. Scopes are priced with the repair in them, because coating over movement is why the same cracks come back.
What is included in cabinet refinishing?
How much does cabinet refinishing cost in Houston?
A typical kitchen runs between $6,000 and $11,000 depending on door count, whether the boxes are included and the finish specified. It keeps cabinet boxes that are usually in good condition, and scope is counted door by door at the walkthrough.
How long does it take?
Most kitchens run seven to nine working days end to end. Much of that is cure time between coats, which cannot be compressed without a finish that marks later. Doors come off early and go back on last.
Can you change the color completely?
Yes. A color change is a question of primer and coats rather than a limit on the finish. Dark to light takes an extra coat; we price that in at the walkthrough rather than discovering it mid-job.
Will the finish hold up in a Houston kitchen?
That is what the product choice is for. A waterborne alkyd cures far harder than a standard wall paint and handles cleaning, humidity and daily contact. The preparation underneath it matters just as much.
Do I need to empty the kitchen?
Cabinet contents need to come out, and we will tell you exactly when. Boxes are masked and sprayed in place while doors and drawer fronts are finished separately, so the kitchen is usable for parts of the project.
Where We Work
Henry Craftsmen works across Houston and the surrounding metro, in Harris, Fort Bend, Montgomery and Brazoria Counties. Choose your city for local project detail, neighborhood notes and the permitting authority that covers that address.